Kokkola | Finland
train-detectionFinland

Kokkola | Finland

Operator
Finnish Transport Infrastructure Agency
Country
Finland
Partner
Mipro
Segment
Main & Regional Line
Application
Track Vacancy Detection
Products
RSR123, FAdC®
Protocols
Frauscher Safe Ethernet FSE
Year
2019
Scope of project
275 sensors on open line 75 sensors in Ylivieska station

Frauscher supplied one of Finland’s busiest railway lines with new axle counters. The line was extended from a single to a double track section and Mipro was looking for a solution which can interface with their interlocking system in an efficient and cost effective way. Other important criteria was a minimum maintenance requirement and outdoor equipment which can cope with the harsh environmental conditions in Finland.

The railway section between Kokkola and Ylivieska is one of Finland’s busiest lines where trains reach up to 200 km/h. Environmental conditions in Finland are harsh: heavy snow and extreme cold temperatures are common during winter.

The Finnish Transport Agency planned to extend the railway section between Kokkola and Ylivieska from a single to a double track section. This project was one of the most comprehensive signalling system projects ever conducted in Finland. Obviously, the project needed to be performed without affecting the regular train operation.

The Frauscher Wheel Sensor RSR123 has proven its reliability even under harshest environmental conditions and combined with the Frauscher Advanced Counter FAdC®, it was the system of choice for this project. This combination allows to detect high speed trains under the very demanding environment given on this line. Using the Frauscher Safe Ethernet FSE protocol significantly sped up the installation and reduced the costs for the entire project. Based on training, the customer was able to configure the system by themselves – thanks to the open interfaces and configuration process.

Saving costs by realising mixed architectures

The FAdC® indoor equipment is located in numerous signaling shelters along the track. This saves massive costs in terms of cabling requirements due to short distances from the sensor to the evaluation board.

System status always on screen

The Frauscher Diagnostic System FDS allows remote access to valuable data for planning and conduction of preventive and predictive maintenance work.

Similar Projects
This might also interest you
1/5
train-detectionAustria

GKB Graz-Köflacher Bahn | Austria

The operator of the Graz-Köflacher Bahn has made substantial modernisations to the network, choosing a decentralised system architecture and the EULYNX standardised interface. In this case, it was crucial that the new system would ensure a seamless transition from the previous parallel interface for relay systems to EULYNX.
train-detectionChina

Chengdu Tram Line 2 | China

Chengdu Tram Line, located in the capital Chengdu City of Sichuan Province, is the first tram line to be operational in the city since 2018.
train-detectionPoland

Metro Warsaw | Poland

Metro Warsaw was looking for an alternative to track circuits for the line M2, to increase the availability of public transport by using reliable signalling technology. In the end, the operator even decided to replace the existing track circuits on line M1 with the Frauscher Axle Counter ACS200.
train-detectionFrance

Homologation for the Île-de-France tramway network | France

The network of Île-de-France tramways in the region of Paris has been a showcase model of public transport since the line T1 opened in 1992. Over a million passengers use these trams daily and today, the system consists of 11 lines covering over 100 kilometres of track. Over the next years it is planned to expand this network even further. For track vacancy detection, the Frauscher axle counting system is considered as being the ideal solution for this comprehensive network.
train-detectionKazakhstan

FAdC® at Uglerudnaya Station | Kazakhstan

AcelorMittal is the operator of the Uglerudnaya industrial railway station, located in Temirtau, Kazakhstan. The station features a total of 56 switches and 52 track sections to enable the smooth flow of train traffic. To ensure the safety of all trains, an interlocking system is used to establish secure routes for incoming, outgoing, and passing trains. This requires effective traffic management and a dependable train detection system to detect the presence of trains on the tracks.